Go to the first, previous, next, last section, table of contents.

Service-Type

ATTRIBUTE Service-Type 6 integer
Users:LR
Hints:-R
Huntgroups:LR
Additivity:Replace
Proxy propagated:Yes
    VALUE      Service-Type      Login-User           1       
    VALUE      Service-Type      Framed-User          2       
    VALUE      Service-Type      Callback-Login-User  3       
    VALUE      Service-Type      Callback-Framed-User 4       
    VALUE      Service-Type      Outbound-User        5       
    VALUE      Service-Type      Administrative-User  6       
    VALUE      Service-Type      NAS-Prompt-User      7       
    VALUE      Service-Type      Authenticate-Only    8       
    VALUE      Service-Type      Call-Check           10

This attribute indicates the type of service the user has requested, or the type of service to be provided. It may be used in both Access-Request and Access-Accept packets.

When used in an Access-Request the Service type represents a hint to the Radius server that the NAS has reason to believe the user would prefer the kind of service indicated.

When used in an Access-Accept, the Service type is an indication to the NAS that the user must be provided this type of service.

The meaning of various service-types is as follows:

Login-User
The user should be connected to a host.
Framed-User
A Framed Protocol should be started for the User, such as PPP or SLIP. The Framed-IP-Address attribute (see section Framed-IP-Address) would supply the IP address to be used.
Callback-Login-User
The user should be disconnected and called back, then connected to a host.
Callback-Framed-User
The user should be disconnected and called back, then a Framed Protocol should be started for the User, such as PPP or SLIP.
Outbound-User
The user should be granted access to outgoing devices.
Administrative-User
The user should be granted access to the administrative interface to the NAS from which privileged commands can be executed.
NAS-Prompt
The user should be provided a command prompt on the NAS from which non-privileged commands can be executed.
Authenticate-Only
Only Authentication is requested, and no authorization information needs to be returned in the Access-Accept
Call-Check
Callback-NAS-Prompt
The user should be disconnected and called back, then provided a command prompt on the NAS from which non-privileged commands can be executed.

Go to the first, previous, next, last section, table of contents.