Radius stores the detailed information about accounting packets it receives
in files
`radacct/nasname/detail' (see section Naming Conventions),
where nasname is replaceed with the short name of the NAS from
the `raddb/naslist' file (see section NAS List -- `raddb/naslist').
By default, this accounting type is always enabled, provided that
`radacct' directory exists and is writable
(see section Naming Conventions). To turn the detailed accounting off,
use detail statement in `config' file. For more information
about it, See section acct statement.
The accounting detail files consist of a record per each accounting request. A record includes the timestamp and detailed dump of attributes from the packet, e.g.:
Fri Dec 15 18:00:24 2000
Acct-Session-Id = "2193976896017"
User-Name = "e2"
Acct-Status-Type = Start
Acct-Authentic = RADIUS
Service-Type = Framed-User
Framed-Protocol = PPP
Framed-IP-Address = 11.10.10.125
Calling-Station-Id = "+15678023561"
NAS-IP-Address = 11.10.10.11
NAS-Port-Id = 8
Acct-Delay-Time = 0
Timestamp = 976896024
Request-Authenticator = Unverified
Fri Dec 15 18:32:09 2000
Acct-Session-Id = "2193976896017"
User-Name = "e2"
Acct-Status-Type = Stop
Acct-Authentic = RADIUS
Acct-Output-Octets = 5382
Acct-Input-Octets = 7761
Service-Type = Framed-User
Framed-Protocol = PPP
Framed-IP-Address = 11.10.10.125
Acct-Session-Time = 1905
NAS-IP-Address = 11.10.10.11
NAS-Port-Id = 8
Acct-Delay-Time = 0
Timestamp = 976897929
Request-Authenticator = Unverified
Go to the first, previous, next, last section, table of contents.